Download V4.00

Download V4.00 Current stable version




USBCNC Software Release V4.00   Stable version
V4.00.46 (11-06-2013)

Feel free to download and test before you buy,
runs with no hardware perfectly.

Release notes V4.00 (11-06-2013) Read !!
Manual V4.00 (Updated 08-03-2012) Visit also our WIKI !!



USBCNC CPU5A Firmware    
Firmware V1.07 USB (CPU5A)

For CPU5A, for USBCNC software for V4.00

Firmware V1.07 Ethernet (CPU5A)

For CPU5A, for USBCNC software for V4.00




USBCNC CPU5B Firmware    
Firmware V1.07AEH USB (CPU5B)

For CPU5B, for USBCNC software for V4.00
Amp enable default 0 Volt

Firmware V1.07AEH Ethernet (CPU5B)

For CPU5B, for USBCNC software for V4.00
Amp enable default 0 Volt.

Firmware V1.07AEL USB (CPU5B)

For CPU5B, for USBCNC software for V4.00
Amp enable default 5 Volt

Firmware V1.07AEL Ethernet (CPU5B) For CPU5B, for USBCNC software for V4.00
Amp enable default 5 Volt



USBCNC CPU5 Configurator   Use For download firmware and configure Ethernet.
CPU5 Configurator manual Read !!
CPU5 Configurator tool Download firmware and Ethernet settings tool
Microsoft .NET framework 4.0 Install this if the tool does not work
Microsoft Visual C++ 2010 Redistributable Package (x86) And this also



Back to download Page