Download V4.01

Download V4.01 Release




USBCNC Software Release V4.01    
V4.01.56 Release(18-08-2014)

Feel free to download and test before you buy.
Download V1.09 firmware below for the new spindle function and Plasma THC function.

Microsoft VC2010 X86 Redistributable

Depending on you system you may need this aswell. If you get "missing DLL" errors install this.

Release notes V4.01.56 (18-08-2014) Read !!
Manual V4.01 (Updated 09-07-2014) Visit also our WIKI !!
Manual PLASMA Cutting  



USBCNC CPU5A Firmware    
Firmware V1.09 USB (CPU5A)

For CPU5A, for USBCNC software for V4.01

Firmware V1.09 Ethernet (CPU5A)

For CPU5A, for USBCNC software for V4.01




USBCNC CPU5B Firmware    
Firmware V1.10AEH USB (CPU5B)

For CPU5B, for USBCNC software for V4.01
Amp enable default 5 Volt
This update is for 3D printing, Adjustable PWM Frequency.

Firmware V1.10AEH Ethernet (CPU5B)

For CPU5B, for USBCNC software for V4.01
Amp enable default 5 Volt.
This update is for 3D printing, Adjustable PWM Frequency.

Firmware V1.10AEL USB (CPU5B)

For CPU5B, for USBCNC software for V4.01
Amp enable default 0 Volt
This update is for 3D printing, Adjustable PWM Frequency.

Firmware V1.10AEL Ethernet (CPU5B) For CPU5B, for USBCNC software for V4.01
Amp enable default 0 Volt
This update is for 3D printing, Adjustable PWM Frequency.
     



USBCNC CPU5 Configurator   Use For download firmware and configure Ethernet.
CPU5 Configurator manual Read !!
CPU5 Configurator tool Download firmware and Ethernet settings tool
Microsoft .NET framework 4.0 Install this if the tool does not work
Microsoft Visual C++ 2010 Redistributable Package (x86) And this also



Back to download Page