Download V4.02

Download V4.02 Release




Eding CNC Software Release V4.02    
V4.02.82 Release
(05-07-2017)

Feel free to download and test before you buy.
Read and apply instructions from chapter 1.4 in the manual!

New: Support for 3DCONNEXION 3D mouse!

New since V4.02.46:
For better Windows 10 compatbility the default installation directory is C:\CNC4.02 in stead of C:\Program files (X86)\CNC4.02.
Existing installations are not affected.

     
Release notes V4.02 (05-07-2017)  
Manual V4.02 (07-06-2017) Manual, read before starting the software chapter 1 !!
Manual V4.02 customizing the GUI (16-10-2015)  
Manual for Plasma cutting with iCNC600  



CPU5A Firmware    Unzip before use
Firmware V1.11 USB (CPU5A)

For CPU5A, for USBCNC software for V4.02

Firmware V1.11 Ethernet (CPU5A)

For CPU5A, for USBCNC software for V4.02




CPU5B Firmware
   Unzip before use
Firmware V1.11AEH USB (CPU5B)

For CPU5B, for Eding CNC software for V4.02
Amp enable default 5 Volt

Firmware V1.12AEH Ethernet (CPU5B)

For CPU5B, for Eding CNC software for V4.02
Amp enable default 5 Volt.

Firmware V1.11AEL USB (CPU5B)

For CPU5B, for Eding CNC software for V4.02
Amp enable default 0 Volt

Firmware V1.12AEL Ethernet (CPU5B) For CPU5B, for Eding CNC software for V4.02
Amp enable default 0 Volt



CPU5A,  CPU5B Download/Configurator Tool    
CPU5 A/B Configurator Download firmware and Ethernet settings tool.
CPU5 A/B Configurator manual Manual for the configurator



iCNC600 Firmware (only for i600 CPU)
   
Firmware i600V1.00 (16-05-2015) Latest firmware for i600
i600 Configurator Download firmware and Ethernet settings tool.
i600 Configurator manual Manual for the configurator



Configurator extra's
  Download and install if the configurator is not working on you system.
Microsoft .NET framework 4.0 Install this if the tool does not work
Microsoft Visual C++ 2010 Redistributable Package (x86) And this also



Back to download Page