2012-03-05 10:11:35 (CET)

USB

During installation be sure to check "Install USB drivers:

 

Select Install USB DriversDuring installation be sure to check

 

After installation reboot the PC, when it is rebooted connect the CPU, after 10 – 60 seconds, you will see that windows has found an USBCNC COM port if you are using and USB based CPU board.  You can check that the USB driver is correctly installed in windows device manager, press Windows start button==>my computer, click with right mouse button and select "properties".

 

Select Device Manager:

 

Device manager USB

 

 

 If you see this, the USB driver is correctly installed. The COM17 number may be different on your system.